Ionic-conductivity switching of vinyl malachite green leuconitrile copolymers based on photoinduced carrier generation

Copolymers of bis[4-(N,N-dimethylamino)phenyl]-4-vinylphenylmethanenitrile (vinyl Malachite Green leuconitrile) with methyl methacrylate or ω-methoxyoligo(oxyethylene) methacrylate have been synthesized, aiming at designing one-component-type organic polymers for photoswitchable ion-conducting films. The triphenylmethanenitrile copolymers with ω-methoxyoligo(oxyethylene) methacrylate were found to undergo ionic-conductivity switching by turning on and off UV light at ambient temperature, owing to their low glass transition temperature. © 1993 John Wiley & Sons, Inc.     

Determination of inorganic arsenic species As(III) and As(V) by high performance liquid chromatography with hydride generation atomic absorption spectrometry detection

The paper presents the principles and advantages of a technique combining high performance liquid chromatography and hydride generation atomic absorption spectrometry (HPLC-HGAAS) applied to speciation analysis of inorganic species of arsenic As(III) and As(V) in ground water samples. With separation of the arsenic species on an ion-exchange column in the chromatographic system and their detection by the hydride generation atomic absorption spectrometry, the separation of the analytical signals of the arsenic species was excellent at the limits of determination of 1.5 ng/ml As(III) and 2.2 ng/ml As(V) and RSD of 4.3% and 7.8% for the concentration of 25 ng/ml. The hyphenated technique has been applied for determination of arsenic in polluted ground water in the course of the study on migration of micropollutants. For total arsenic concentration two independent methods: HGICP-OES and HGAAS were used for comparison of results of real samples analysis.     

Speciation of inorganic arsenic by electrochemical hydride generation atomic absorption spectrometry

A simple procedure was developed for the speciation of inorganic arsenic by electrochemical hydride generation atomic absorption spectrometry (EcHG–AAS), without pre-reduction of As(V). Glassy carbon was selected as cathode material in the flow cell. An optimum catholyte concentration for simultaneous generation of arsine from As(III) and As(V) was 0.06 mol l⁻¹ H₂SO₄. Under the optimized conditions, adequate sensitivity and difference in ratio of slopes of the calibration curves for As(III) and As(V) can be achieved at the electrolytic currents of 0.6 and 1 A. The speciation of inorganic arsenic can be performed by controlling the electrolytic currents, and the concentration of As(III) and As(V) in the sample can be calculated according to the equations of absorbance additivity obtained at two selected electrolytic currents. The calibration curves were linear up to 50 ng ml⁻¹ for both As(III) and As(V) at 0.6 and 1 A. The detection limits of the method were 0.2 and 0.5 ng ml⁻¹ for As(III) and As(V) at 0.6 A, respectively. The relative standard deviations were of 2.1% for 20 ng ml⁻¹ As(III) and 2.5% for 20 ng ml⁻¹ As(V). The method was validated by the analysis of human hair certified reference material and successfully applied to speciation of soluble inorganic arsenic in Chinese medicine.     

Enhancement of Photocurrent Generation of a Novel Stilbazolium Dye Dimer in LB Monolayer Films

A novel dye dimer,bis-{[1-(N-hexadecyl-4-pyridinium)-2-(4-N,N-dimethylaminopheyl)] ethenyl} methane diiodide (C16BP) was synthesized,and the photoelectrochemistry of the dye Langmuir-Blodgett monolayer modified ITO electrode was investigated.For comparison,the photoelectrochemistry of the monomer (E)-N-hexadexyl-4-[2-(4-N,N-dimethylaminophenyl) ethenyl] pyridinium iodide (C16P) was also measured.The results show that the photocurrent generation property of the dimer is enhanced.The photocurrent generation quantum yield is 0.38% for C16BP,while that for C16P is 0.23%.     

The Enhancement of Efficiency of High-order Harmonic in Intense Laser Field Based on Asymptotic Boundary Conditions and Symplectic Algorithm

Asymptotic boundary condition (ABC) of laser-atom interaction presented recently is applied to transform the initial value problem of the time-dependent Schrödinger equation (TDSE) in infinite space into the initial and boundary value problem in the finite space, and then the TDSE is discretized into linear canonical equations by substituting the symmetry difference quotient for the 2-order partial derivative. The canonical equation is solved by symplectic algorithm. The ground state and the equal weight coherent superposition of the ground state and the first excited state have been taken as the initial conditions, respectively, while we calculate the population of bound states, the evolution of average distance and the high-order harmonic generation (HHG). The conversion efficiency of HHG can be enhanced by initial coherent superposition state and moderate laser intensities     

Hall effects and entropy generation applications for peristaltic flow of modified hybrid nanofluid with electroosmosis phenomenon

The electroosmotic peristaltic flow of modified hybrid nanofluid in presence of entropy generation has been presented in this thermal model. The Hall impact and thermal radiation with help of nonlinear relations has also been used to modify the analysis. The assumed flow is considered due to a non-uniform trapped channel. The properties of modified hybrid nanofluid model are focused with interaction of three distinct types of nanoparticles namely copper ($Cu)$, silver ($Ag$) and aluminum oxide ($A{l}_2{O}_3).$ The mathematical modeling and significances of entropy generation and Bejan number are identified. With certain flow assumptions, the governing equations are attained for optimized peristaltic electroosmotic problem. Widely used assumptions of long wave length and low Reynolds number reduced the governing equations in ordinary differential equations. The ND solver is flowed for the solution process. The physical significant of results is observed by assigning the numerical values to parameters.     

Flow injection for the determination of Se(IV) and Se(VI) by hydride generation atomic absorption spectrometry with microwave oven on-line prereduction of Se(VI) to Se(IV)

An on-line flow injection system has been developed for the selective determination of Se(IV) and Se(VI) in citric fruit juices and geothermal waters by hydride generation atomic absorption spectrometry with microwave-aided heating prereduction of Se(VI) to Se(IV). The samples and the prereductant solutions (4 mol l⁻¹ HCl for Se(IV) and 12 mol l⁻¹ HCl for Se(VI)) which circulated in a closed-flow circuit were injected by means of a time-based injector. This mixture was displaced by a carrier solution of 1% v/v of hydrochloric acid through a PTFE coil located inside the focused microwave oven and mixed downstream with a borohydride solution to generate the hydride. The linear ranges were 0–120 and 0–100 μg l⁻¹ of Se(IV) and Se(VI), respectively. The detection limits were 1.0 μg l⁻¹ for Se(IV) and 1.5 μg l⁻¹ for Se(VI). The precision (about 2.0–2.5% RSD) and recoveries (96–98% for Se(IV) and 94–98% for Se(VI)) were good. Total selenium values were also obtained by electrothermal atomic absorption spectrometry which agreed with the content of both selenium species. The sample throughput was about 50 measurements per hour. The main advantage of the method is that the selective determination of Se(IV) and Se(VI) in citric fruit juices and geothermal waters is performed in a closed system with a minimum sample manipulation, exposure to the environment, minimum sample waste and operator attention.     

Electrochemical vapor generation of selenium species after online photolysis and reduction by UV-irradiation under nano TiO<Subscript>2</Subscript> photocatalysis and its application to selenium speciation by HPLC coupled with atomic fluorescence spectrometry

An online UV photolysis and UV/TiO₂ photocatalysis reduction device (UV–UV/TiO₂ PCRD) and an electrochemical vapor generation (ECVG) cell have been used for the first time as an interface between high-performance liquid chromatography (HPLC) and atomic fluorescence spectrometry (AFS) for selenium speciation. The newly designed ECVG cell of approximately 115 L dead volume consists of a carbon fiber cathode and a platinum loop anode; the atomic hydrogen generated on the cathode was used to reduce selenium to vapor species for AFS determination. The noise was greatly reduced compared with that obtained by use of the UV–UV/TiO₂ PCRD–KBH₄–acid interface. The detection limits obtained for seleno-DL-cystine (SeCys), selenite (Se^IV), seleno-DL-methionine (SeMet), and selenate (Se^VI) were 2.1, 2.9, 4.3, and 3.5 ng mL^–1, respectively. The proposed method was successfully applied to the speciation of selenium in water-soluble extracts of garlic shoots cultured with different selenium species. The results obtained suggested that UV–UV/TiO₂ PCRD–ECVG should be an effective interface between HPLC and AFS for the speciation of elements amenable to vapor generation, and is superior to methods involving KBH₄.     

Selective pre-concentration of selenite from aqueous samples using mercapto-silica

Silica gel modified with 3-mercaptopropyl-trimethoxysilane was used for the selective separation and pre-concentration of selenite (Se(IV)) from aqueous solutions containing Se(IV) and selenate (Se(VI)). Over a wide range of acidity, from 2 mol l⁻¹ HCl to pH 9.00, Se(IV) was taken up by the mercaptopropyl-silica with nearly 100% efficiency; Se(VI) however was unretained. Se(IV) content was determined by hydride generation atomic absorption spectrometry (HGAAS), following batch release of the selenium from the pre-concentration medium by acidic periodate. The overall pre-concentration efficiency, including both take-up and elution, in the range of 89-106%. The method was applied to spiked seawater samples containing as low as 800 ng l⁻¹ Se in selenite form. This solid-phase extraction system offers several major advantages over conventional solvent extraction procedures. It firstly exhibits high selectivity for Se(IV) over Se(VI). Using the solid-phase media, pre-concentration of Se(IV) in dilute water samples can be carried out in the field, stabilizing the selenite-selenium in a convenient form for transport and storage. In addition, selenium stored on silica is derived solely from Se(IV) overcoming problems of selenium redox speciation changes and loss during storage.     

Determination of tin in soil by continuous hydride generation and inductively coupled plasma mass spectrometry

A method was investigated for the determination of Sn in soil samples by KOH fusion followed by continuous hydride generation coupled with inductively coupled plasma mass spectrometry (HG-ICP-MS). Sample solutions in 3.0 M HCl were mixed in line with a solution of 2.4% NaBH₄ and 0.25 M KOH to generate stannane gas. The mixture was delivered continuously to a gas/liquid separator and the stannane gas was introduced into a Perkin-Elmer Sciex Elan 6000 ICP-MS for concentration measurements. A method detection limit of 0.45 mg/kg was sufficient for Sn levels commonly found in soil samples. Sn concentrations as low as 2.5 mg/kg were reproducibly measured in soil samples. Sample results by HG-ICP-MS agreed within ±17% relative difference to results by instrumental neutron activation analysis (INAA) and within ±6% relative difference to results by KOH fusion followed by inductively coupled plasma optical emission spectroscopy (ICP-OES).